SAE AIR1244B
Aerospace, Slipper Seals, Selection for Fluid Power Applications
standard by SAE International, 08/05/2022
SAE AMS4049N
Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn – 2.5Mg – 1.6Cu – 0.23Cr (Alclad 7075; -T6 Sheet – T651 Plate) Solution and Precipitation Heat Treate
standard by SAE International, 08/05/2022
SAE AMS5659/H1025C
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Remelted, Solution and Precipitation Heat Treated (H1025)
standard by SAE International, 09/14/2022
SAE AMS5664G
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings and Rings 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode or Vacuum Induction Melted 1950 oF (1066 oC) Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 08/17/2022
SAE AMS3042G
Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
standard by SAE International, 08/05/2022
SAE AMS4372B
Aluminum Alloy, Plate 3.5Cu – 1.0Li – 0.40Mg – 0.35Mn – 0.45Ag – 0.12Zr (2050-T34) Solution Heat Treated and Stress Relieved
standard by SAE International, 08/05/2022
SAE AIR1389C
FAR – Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft
standard by SAE International, 06/27/2022
SAE AMS1389
Sealing Compound, Polythioether Rubber, Light-Cured, for Integral Fuel Tanks and General Purpose, Intermittent use to 360 ¿¿F (182 ¿¿C)
standard by SAE International, 04/25/2022
SAE AMS3328D
Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 35 – 45 Type ¿¿¿A¿¿¿ Durometer Hardness for Products Used in Engine Oil Systems/Fuel Systems
standard by SAE International, 05/24/2022
SAE AMS5679J
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 73Ni – 15.5Cr – 2.2Cb – 8.0Fe
standard by SAE International, 05/16/2022