NACE G193-11a
Standard Terminology and Acronyms Relating to Corrosion
standard by National Association of Corrosion Engineers, 09/01/2011
NACE G193-12b
Standard Terminology and Acronyms Relating to Corrosion
standard by National Association of Corrosion Engineers, 08/01/2012
NACE TM0186-94
Standard Test Method – Holiday Detection of Internal Tubular Coatings of 250 to 760 um (10 to 30 mils) Dry Fillm Thickness
standard by National Association of Corrosion Engineers, 11/01/1985
NACE TM0498-2006
Standard Test Method for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes
standard by National Association of Corrosion Engineers, 01/01/2006
NACE RP0181-94
Standard Recommended Practice – Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment
standard by National Association of Corrosion Engineers, 01/01/1994
NACE TM0177-96
Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in Hydrogen Sulfide (H2S) Environments
standard by National Association of Corrosion Engineers, 12/23/1996
NACE TM0198-2011
Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys for Stress Corrosion Cracking in Sour Oilfield Service
standard by National Association of Corrosion Engineers, 10/28/2011
NACE SP0273-2007
Standard Practice – Handling and Proper Usage of Inhibited Oilfield Acids
standard by National Association of Corrosion Engineers, 03/11/2007
NACE RP0196-2004
Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
standard by National Association of Corrosion Engineers, 11/15/2004
NACE TM0183-93
Standard Test Method – Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
standard by National Association of Corrosion Engineers, 01/01/1988
NACE TM0198-98
Slow Strain Rate Test Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service
standard by National Association of Corrosion Engineers, 01/01/1998
NACE TM0384-94
Standard Test Method – Holiday Detection of Internal Tubular Coatings of Less Than 250, um (10 mils) Dry Film Thickness
standard by National Association of Corrosion Engineers, 01/01/1984