NACE RP0286-2002
Standard Recommended Practice – Electrical Isolation of Cathodically Protected Pipelines
standard by National Association of Corrosion Engineers, 01/01/2002
NACE No. 2/SSPC-SP 10
Joint Surface Preparation Standard: Near-White Metal Blast Cleaning
standard by National Association of Corrosion Engineers, 10/01/1994
NACE TM0374-2001
Standard Test Method – Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
standard by National Association of Corrosion Engineers, 03/15/2001
NACE MR0175/ISO 15156-3:2009/Cir. 3:2014
Petroleum and Natural Gas industries – Materials for use in H2S-containing environments in oil and gas production – Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons and Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys Circular 3
standard by National Association of Corrosion Engineers, 01/27/2014
NACE G193-10a
Standard Terminology and Acronyms Relating to Corrosion
standard by National Association of Corrosion Engineers, 03/01/2010
NACE RP0475-98
Standard Recommended Practice – Selection of Metallic Materials to be Used in all Phases of Water Handling for Injection Into Oil-Bearing Formations
standard by National Association of Corrosion Engineers, 01/01/1998
NACE RP0102-2002
In-Line Inspection of Pipelines
standard by National Association of Corrosion Engineers, 01/01/2002
NACE TM21423-2023
Determination of Substrate and Surface Temperature Limits for Insulative Coatings Used for Personnel Protection
standard by National Association of Corrosion Engineers, 01/19/2023
NACE RP0104-2004
The Use of Coupons for Cathodic Protection Monitoring Applications
standard by National Association of Corrosion Engineers, 12/03/2004
NACE MR0103-2007
Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
standard by National Association of Corrosion Engineers, 07/01/2007
NACE RP0394-94
Standard Recommended Practice – Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
standard by National Association of Corrosion Engineers, 10/01/1994
NACE RP0392-2001
Standard Recommended Practice – Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems
standard by National Association of Corrosion Engineers, 01/01/2001