ASD-STAN prEN 3795

Anaerobic polymerisable compounds — Test method – Determination of freedom from excessive cure rate
Data Sheet by ASD-STAN Standardization, 04/30/1997

ASD-STAN prEN 3512

Steel FE-PL1801 (100Cr6) – Vacuum induction melted and consumable electrode remelted – Hardened and tempered – Hollow bars for the manufacturer of bearings – 3,5 mm <or= a <or= 55mm
Data Sheet by ASD-STAN Standardization, 03/31/1999

ASD-STAN prEN 2894

Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated – Classification : 1 550 MPa (at ambient temperature) / 315 deg C
Data Sheet by ASD-STAN Standardization, 03/31/1995

ASD-STAN prEN 3511

Steel FE-PL 1801 (100Cr6) Vacuum induction melted and consumable electrode remelted Softened Bar for the manufacture of machined bearings a or D < 130 mm
Data Sheet by ASD-STAN Standardization, 03/31/1999

ASD-STAN prEN 3509

Steel FE-PL1501 (30CrMo12) – Air melted – Hardened and tempered – Bar – De <or= 40 mm – 1 050 MPa <or= Rm <or= 1 250 MPa
Data Sheet by ASD-STAN Standardization, 12/31/1998

ASD-STAN prEN 2961

Heat resisting alloy NI-PH2601 – Solution treated – Bar for machined fasteners – D <or= 50 mm – Rm >or= 1270 MPa
Data Sheet by ASD-STAN Standardization, 03/31/1994

ASD-STAN prEN 2824

Burning behaviour of non metallic materials under the influence of radiating heat and flames – Determination of smoke density and gas components in the smoke materials – Test equipment, apparatus and media
Data Sheet by ASD-STAN Standardization, 01/31/1995

ASD-STAN prEN 2701

Aluminium alloy (2024) – Solution treated, water quench, cold worked and naturally aged (T3) – Drawn tube for structures – 0,6 <or= a <or=12,5 mm
Data Sheet by ASD-STAN Standardization, 03/31/1988

ASD-STAN prEN 2923

Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated – Classification : 600 MPa (at ambient temperature)/ 425deg C
Data Sheet by ASD-STAN Standardization, 09/30/1996

ASD-STAN prEN 3866

Non-metallic materials – Glass tranparencies – Test methods – Determination of ream and surface ripple
Data Sheet by ASD-STAN Standardization, 10/31/2001