ASD-STAN prEN 2252

"Aerospace series – Steel FE-PL1505 (15CrMoV6) – 1 080 MPa < or = Rm < or = 1 250 MPa – Forgings
Data Sheet by ASD-STAN Standardization, 03/31/2010

ASD-STAN prEN 2712-002

Cables, electrical, single and multicore for general purpose – Operating temperatures between -55 deg C and 150 deg C – Part 002 : Screened and jacketed -General
Data Sheet by ASD-STAN Standardization, 03/31/1995

ASD-STAN prEN 2120

Steel FE-PA12 – Softened And Cold Drawn – Bars And Wires 0,25 mm <or= D <or= 2,5 mm – Aerospace Series
Data Sheet by ASD-STAN Standardization, 08/01/1977

ASD-STAN prEN 3018

Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) – Consumable electrode remelted – Cold drawn wire for the manufacture of thread inserts – D <or= 3 mm
Data Sheet by ASD-STAN Standardization, 07/31/1997

ASD-STAN prEN 3345

Aluminium alloy (7150) – Solution treated, water quenched controlled stretched and artificially aged (T6511) – Extruded bar and section (a or D) <or= 90 mm – With peripheral coarse grain control
Data Sheet by ASD-STAN Standardization, 10/17/1988

ASD-STAN prEN 2850

Carbon fibre thermosetting resin unidirectional laminates – Compression test parallel to the fibre direction
Data Sheet by ASD-STAN Standardization, 11/28/1997

ASD-STAN prEN 2470

Steel FE-PA11 – Softened And Cold Drawn – Wires For Rivets 1mm <or= D <or= 10 mm – Aerospace Series
Data Sheet by ASD-STAN Standardization, 01/01/1981

ASD-STAN prEN 3513

Steel FE-PL711 – hardened and tempered – 900 <or= Rm <or= 1100 MPa – Bar and wire – De <or= 45 mm
Data Sheet by ASD-STAN Standardization, 03/31/1988

ASD-STAN prEN 3509

Steel FE-PL1501 (30CrMo12) – Air melted – Hardened and tempered – Bar – De <or= 40 mm – 1 050 MPa <or= Rm <or= 1 250 MPa
Data Sheet by ASD-STAN Standardization, 12/31/1998