ASD-STAN prEN 2272
Steel FE-PM13 S – 1550 MPa <or= Rm <or= 1750 MPa – Forgings De <or= 70 mm – Aerospace Series
Data Sheet by ASD-STAN Standardization, 06/01/1979
ASD-STAN prEN 2396
HEAT RESISTING NICKEL BASE ALLOY NI-P95-HT – COLD WORKED, SOLUTION TREATED AND PRECIPITATION TREATED – BARS FOR MACHINED BOLTS D <or= 25 mm — AEROSPACE SERIES
Data Sheet by ASD-STAN Standardization, 05/01/1980
ASD-STAN prEN 2123
Aluminium alloy AL-P2618A – T851 – Plate – 6 mm <a <or= 140 mm
Data Sheet by ASD-STAN Standardization, 11/30/1999
ASD-STAN prEN 2039
Rectangular steel bars – drawn – Dimensions – Tolerances h 11 / h 12
Data Sheet by ASD-STAN Standardization, 12/01/1976
ASD-STAN prEN 4825
Aerospace series – Steel X12CrNiMoV12-3 (1.4938) – Air melted and consumable electrode remelted – Hardened and tempered – Bars – De < 150mm – 900MPa < Rm < 1100MPa
Data Sheet by ASD-STAN Standardization, 02/01/2020
ASD-STAN prEN 2306
HEAT RESISTING NICKEL BASE ALLOY NI-P91-HT – ANNEALED – BARS — AEROSPACE SERIES
Data Sheet by ASD-STAN Standardization, 05/01/1980
ASD-STAN prEN 2062
Fully non-metallic body pulleys, with bearing, for control cables – Technical specification
Data Sheet by ASD-STAN Standardization, 06/01/1979
ASD-STAN prEN 2111
Chloroprene Rubber (CR) -Hardness 60 – Characteristics – Aerospace Series
Data Sheet by ASD-STAN Standardization, 01/01/1978
ASD-STAN prEN 2155-04
Test methods for transparent materials for aircraft glazing – Part 4 : Determination of ultraviolet light transmission over the wavelength range 280 nm to 360 nm
Data Sheet by ASD-STAN Standardization, 10/31/2000
ASD-STAN prEN 2002-006
Metallic materials – Test methods – Part 6 : Bend testing
Data Sheet by ASD-STAN Standardization, 01/31/2000
ASD-STAN prEN 2108
Acrylonitrile-Butadiene Rubber (NBR) – Hardness 80 – Characteristics – Aerospace Series
Data Sheet by ASD-STAN Standardization, 01/01/1978
ASD-STAN prEN 2091
Aluminium alloy 2024-T4 – Clad sheet and strip – 0,4 <or= a <or= 6 mm
Data Sheet by ASD-STAN Standardization, 05/01/1985