ASAE/ASABE S579.1 (R2016)
Yield Monitor Field Test Engineering Procedure
standard by The American Society of Agricultural and Biological Engineers, 07/01/2012
ASAE/ASABE EP425.1
Underground Outlets for Conservation Practices
standard by The American Society of Agricultural and Biological Engineers, 05/01/2016
ASAE/ASABE EP405.1 (R2019)
Design and Installation of Microirrigation Systems
standard by The American Society of Agricultural and Biological Engineers, 04/01/1988
ASAE/ASABE AD17225-4:2014
Solid biofuels – Fuel specifications and classes – Part 4: Graded wood chips
standard by The American Society of Agricultural and Biological Engineers, 02/01/2018
ASAE/ASABE EP456 (R2015)
Test and Reliability Guidelines
standard by The American Society of Agricultural and Biological Engineers, 12/01/1986
ASAE/ASABE ISO 5687:2018
Equipment for harvesting — Combine harvesters — Determination and designation of grain tank capacity and unloading device performance
standard by The American Society of Agricultural and Biological Engineers, 10/01/2018
ASAE/ASABE S431.4
2000-RPM Front and Mid PTO for Lawn and Garden Ride-on Tractors and Commercial Turf Equipment, Mid PTO for Compact Utility Tractors
standard by The American Society of Agricultural and Biological Engineers, 05/01/2019
ASAE/ASABE EP496.3 (R2015)
Agricultural Machinery Management, Includes Corrigenda 1 (May 2017)
standard by The American Society of Agricultural and Biological Engineers, 02/01/2006
ASAE/ASABE S292.6
Uniform Terminology for Agricultural Waste and By-Product Management
standard by The American Society of Agricultural and Biological Engineers, 09/01/2019
ASAE/ASABE S290.2 (R2019)
Determining Cutting Width and Designated Mass of Disk Harrows
standard by The American Society of Agricultural and Biological Engineers, 12/01/2004
ASAE/ASABE S583.2
Safety for Agricultural Front-End Loaders
standard by The American Society of Agricultural and Biological Engineers, 05/01/2020
ASAE/ASABE ISO 500-3:2014 (R2019)
Agricultural Tractors – Rear-mounted power take-off types 1, 2, 3 and 4 – Part 3: Main PTO dimensions and spline dimensions, location of PTO
standard by The American Society of Agricultural and Biological Engineers, 02/01/2015