NACE G193-10b

Standard Terminology and Acronyms Relating to Corrosion
standard by National Association of Corrosion Engineers, 11/16/2010

AS 60068.2.5:2023

Environmental testing, Part 2.5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (IEC 60068-2-5:2018 (ED. 3.0) MOD)
standard by Standards Australia, 05/12/2023

SAE AMS5906D

Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength
standard by SAE International, 06/02/2023

CGA F-2

Guideline for Food Gases Product Hazard Analysis and Risk-Based Preventive Control (HARPC)
standard by Compressed Gas Association, 07/01/2023

SAE AMS6352M

Steel Sheet, Strip, and Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
standard by SAE International, 03/23/2023

CGA G-6.4

Safe Transfer of Liquid Carbon Dioxide in Insulated Cargo Tanks, Tank Cars, and Portable
standard by Compressed Gas Association, 05/01/2023

AS 1417:2023

Receiving antennas for radio and television in the VHF and UHF broadcast bands – Design, manufacture and performance of outdoor terrestrial television antennas
standard by Standards Australia, 05/26/2023

IEC 61076-8-104 Ed. 1.0 b:2023

Connectors for electrical and electronic equipment – Product requirements – Part Part 8-104: Power connectors – Detail specification for 2-pole circular connectors with 40 A rated current and push-pull locking IP65/IP67 with metal housing
standard by International Electrotechnical Commission, 05/01/2023

NACE RP0193-93

Standard Recommended Practice – External Cathodic Protection of On-Grade Metallic Storage Tank Bottoms
standard by National Association of Corrosion Engineers, 10/01/1993