NACE RP0492-99
Standard Recommended Practice – Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes
standard by National Association of Corrosion Engineers, 04/28/1999
BS PAS 66:2005
Official identification eartags for sheep and goats. Specification
standard by BSI Group, 06/29/2007
SAE AMS6308G
Steel, Bars, and Forgings and Forging Stock 0.90Si – 1.0Cr – 2.0Ni – 3.2Mo – 2.0Cu – 0.10V (0.07 – 0.13C) Vacuum Arc or Electroslag Remelted
standard by SAE International, 05/01/2023
BS PD ISO/TS 23792-1:2023
Intelligent transport systems. Motorway chauffeur systems (MCS)-Framework and general requirements
standard by BSI Group, 07/14/2023
IEC 62281 Ed. 4.2 b:2023
Safety of primary and secondary lithium cells and batteries during transport CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/01/2023
SAE AMSR25988B
Rubber: Fluorosilicone (FVMQ), Engine Oil / Fuel-Resistant, For Seals in Engine Oil Systems/Fuel Systems
standard by SAE International, 06/27/2023
BS PD CEN/TS 927-12:2023
Paints and varnishes. Coating materials and coating systems for exterior wood-Ultraviolet and visible radiation transmittance
standard by BSI Group, 05/31/2023
SAE AS4410C
FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN TO FLARED TUBE
standard by SAE International, 03/20/2023
AASHTO T 193-22
Standard Method of Test for The California Bearing Ratio
standard by American Association of State and Highway Transportation Officials, 2022
AS 2925.7-1987
Methods of testing thermosetting laminated sheet, Method 7: Method for determining resistance to impact
standard by Standards Australia, 02/02/1987